DeWalt Launches New Saws and Cordless Nailer

Angled-Finish-Nailer-300x300At just 6lbs (weighed with a 2.0Ah battery), the 20V MAX*XR® Cordless 16 GA Angled Finish Nailer is 2.3lbs lighter and 1 inch shorter in height**. Using the 2.0Ah battery that is included in the kit version, the 16 GA Finish Nailer drives up to 800 nails per charge in sequential mode. Because the DCN660 is compatible with all 20V MAX* XR® DEWALT Lithium Ion batteries, it’s also capable of driving up to 2,200 nails per charge in sequential mode when usingDEWALT’s 20V MAX* XR® 5.0Ah battery (DCB205 sold separately

 

 

 

 

 

Band-Saw-300x300The 20V MAX* XR® Brushless Deep Cut Band Sawfeatures a 5” by 4-3/4” capacity to cut strut, pipe, angle iron, pipe and various other materials. At only 13.8lbs (with a 5.0Ah battery), the cordless Band Saw is 1.2lbs lighter than DEWALT’s corded Band Saw (DWM120). With its magnesium housing and adjustable bail handle and hook, the 20V MAX* XR®Brushless Deep Cut Band Saw is a lightweight and well-balanced tool that provides the user with their choice of orientation for comfortable use.

 

 

 

 

 

Sliding-Miter-Saw-1-300x300The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3° to 48° left.  With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2×8 inch horizontal cut capacity, the DCS361 will handle most of the common cuts needed.   The DCS361spins at 3750 RPM and makes, on average 183 cuts of 2×4 pine or 275 cuts of 3-1/4 inch pine base molding on a single battery charge (DCB204 4.0Ah battery). The DCS361 with a battery is lightweight at 31.6lbs and with the integrated cast-in side handles it’s easy to carry around the jobsite.

*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

Related posts

Leave a Comment